India has installed 6.05 GW of new wind capacity in FY2025–26, which is the highest the country has recorded in a single year, ahead of the 5.5 GW added in FY2016–17. By the end of September 2026, the total had reached 59.2 GW according to MNRE, and Gujarat alone had about 17 GW of it.
In conventional power sources, gas, oil, and coal have always been leading for over a century in generating power. But keeping in mind the economic and environmental landscape, the transition is bigger. In wind energy, technological advancements have brought efficiency, sustainability, and long-term competitiveness. In this comprehensive guide, we will talk about the technical, economic, and environmental differences between wind and conventional power, explaining why renewables are becoming the pioneer of modern energy transformation.
What is wind energy and how does it work?
Wind energy is produced by turning the movement of air into electricity. Turbines with long blades catch the force of the wind, and that force makes the blades spin around a central rotor. The spinning rotor drives a generator housed in the nacelle, which changes the mechanical energy into electrical energy. The electricity then travels through cables to a substation and into the grid, where it supplies homes, factories and offices.
Wind turbines are built in two main types, onshore and offshore. Onshore wind farms stand on land and are the more common choice because they are quicker to install and are low maintenance. Offshore wind farms are built in the sea, where the wind is stronger and more consistent, so each turbine can produce more energy.
Wind vs conventional power: the key differences
The table below puts the two side by side.
| Aspect | Conventional power (coal, gas, oil) | Wind energy |
| How power is made | Coal, gas or oil is burnt to make heat. The heat turns water into steam, the steam spins a turbine and the turbine runs a generator. A gas plant can skip the steam step and burn the fuel straight in a turbine, though many add a steam stage afterwards for extra output. | Wind pushes against the blades and the rotor turns. That rotation drives a generator, either through a gearbox or directly. There is no fire and no boiler. |
| Efficiency | A typical coal unit turns around a third of the fuel’s heat into electricity. The rest escapes as waste heat through the chimney and the cooling system. | A modern turbine can capture 45 to 50 per cent of the energy in the wind passing through its blades. The theoretical limit is 59.3 per cent, called the Betz limit. Since the wind is naturally produced, the energy a turbine misses does not cost anything. |
| Fuel and supply | Coal is mined, loaded onto rail wagons and stored at the plant. India also imports crude oil, LNG and some coal, so part of the power cost follows global prices. | Procurement and supply-chain requirements are minimal, with limited movement of major components such as wind turbine blades and other construction materials. |
| Emissions | IPCC median estimates over the full life cycle are about 820 g of CO₂-equivalent per kWh for coal and 490 g for gas. These plants also release sulphur dioxide, nitrogen oxides and fine ash. | About 11 g of CO₂-equivalent per kWh for onshore wind, counting manufacturing, construction and decommissioning. A running turbine releases no emissions at all. |
| Water | Boilers and cooling systems use a lot of water every day. This becomes a problem in dry districts. | There is less wastage of water. Some water goes into cleaning and maintenance, and that is about all. |
| Cost pattern | The biggest running cost is fuel, so the price per unit moves up and down with coal and gas markets. | Most of the money is spent before the first unit is generated. After that, the costs are maintenance, land lease and insurance. |
| Output | Plants can generate when the grid needs them to. Even so, average coal plant utilisation in India was only about 69 per cent in FY2024–25, according to Ember. | Output follows the wind. In southern and western India, the winds are strongest between May and September, so the grid has to plan around forecasts, storage and other sources. |
| Land and site | A coal plant needs the plant site, ash ponds, rail links and usually a mine somewhere. | Each turbine takes up a small pad. Farming and grazing continue around it. The heavy civil work goes into foundations, access roads and the line that carries power to the substation. |
Advantages of wind energy
Here are the benefits of renewable energy that must be considered:
Provides a renewable and sustainable power source
Wind energy depends on natural air movement, which is frequently refilled by the sun’s heating of the Earth. Unlike fossil fuels, wind can never run out or be depleted. This makes wind an inexhaustible resource, providing a reliable, long-term energy supply. The renewable nature of wind energy enables us to minimise dependency on finite energy sources, offering support to resilient power systems.
Cleaner air and a smaller carbon footprint
A coal unit puts carbon dioxide, sulphur dioxide, nitrogen oxides and fine ash into the air for every hour it runs. A turbine puts out none of these. Even after counting steel, concrete and blade manufacturing, the IPCC median for onshore wind is around 11 g per kWh, roughly one per cent of coal’s figure. Cleaner air also means fewer breathing and heart problems linked to thermal plant pollution, and turbines use very little water, which helps in dry regions.
Generate cost-effective energy
This is one of the important benefits of renewable energy. While upfront construction costs can be substantial, maintenance and operational costs are still low since wind power is free. This cost-effective solution makes wind energy a better and smarter investment, providing stable and predictable costs.
Let’s understand this with an example: Wind tariffs in India fell to about Rs 2.43 per kWh by 2017–18, according to Ember’s 2024 analysis, and then rose again to around Rs 3.75 as land and equipment got costlier. Carbon Tracker studied coal plants worldwide in 2018 and found that up to 62 per cent of India’s existing coal capacity cost more to run than a new wind or solar plant would cost to build.
Less exposure to imported fuel
India imports most of its crude oil, a fair amount of gas, and some coal plants also depend on imported coal. Wind generated in Tamil Nadu or Gujarat stays inside the Indian grid. Every unit it supplies is one less unit that depends on a shipping route or an exchange rate. This is one of the best ways for sustainable energy.
Develops jobs and infrastructure
IRENA counted about 1.5 million wind jobs worldwide in 2023. A lot of that work happens near the site itself: tower fabrication, foundation construction, road building, cable laying, and long-term maintenance. A single wind farm keeps local contractors and technicians busy for years, which matters most in districts where farm income is seasonal.
There is Scalability and Flexibility
A few turbines can supply a factory or a village. A large wind farm can feed a city. Planners can pick the size that suits the site, the nearest substation and the local land rules, instead of building a fixed-size plant.
What is the Future of Wind Energy?
India’s National Electricity Plan has a target of 124 GW of wind by 2032. Ember has worked out that this needs about 8.8 GW of new capacity every year between 2026 and 2030.
The government is targeting 7.5 to 8 GW for FY2026–27. Land, transmission lines and the time taken to commission projects will decide whether that happens.
Coal’s role is changing as well. Ember expects average coal plant utilisation to fall from 69% to about 55% by FY2031–32, because cheap solar is filling the grid during the day. Wind can cover the hours after sunset in many places.
Hybrid projects put wind and solar on one grid connection and share the same evacuation line. A turbine delivers what it was designed to only when the foundation, the road, and the substation are finished on time. A delay in any one of them means lost generation.
Read More : A Practical Guide to Wind Energy BOP: Construction, Infrastructure, and Sustainability
Building a wind project? Get the groundwork right
Kshema Power India is a Chennai-based EPC company. It reports more than 4,500 MW of wind EPC work and a team of over 200 engineers and technicians. Its projects include wind parks and substations in high-altitude terrain in India and in desert conditions in the Middle East.
If your wind energy site is approved but the foundation or evacuation work has not started, or a project has stalled midway, talk to Kshema. Send your location and capacity to enquiry@kshemapower.com, and the team will tell you what it takes to get your turbines running.
